REFLEX MILSPEC PISTOL FULL ENC RED DOT

ROMEO-M17 Sight

The M17 and M18 pistols have been selected by the US Military as the official sidearm, and the ROMEO-M17 is the only optic that is truly designed specifically for this pistol. All other optics have many disadvantages and make several compromises. The ROMEO-M17 does not. This is an American-built MIL-SPEC red dot truly worthy of the SIG SAUER name.

*Please Note – The ROMEO-M17 pistol red dot sight utilizes SIG SAUER’S proprietary SIG-LOC mounting interface and only fits SIG SAUER M17/M18 military, issue, and commemorative issue pistols with a single optics plate mounting screw. This sight will not fit any other pistols.

Description:

• A fully enclosed, sealed and purged optical system, for ultimate protection from the elements
• Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block and sight block screw
• 7075 Aluminum housing
• Integrated gas deflector on the front of the housing
• Machined anti-reflection grooves on all rear surfaces for reduced glare
• Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
• SIG-LOC™ (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup.
• A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only, dot only, or circle/dot combination).
• Independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
• 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
• A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled, for use with or without tools.
• Minimum continuous runtime of 20,000 hours, at medium brightness setting
• 2 drainage holes machined in the sides of the housing, just behind the rear sealed window, to allow pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting)
• Windage and elevation adjustments have tactile clicks. Adjustment screws are slotted, for use with any small flat-blade tool. Adjustment resolution is 1.5 MOA per click.
• MOTAC (Motion Activated Illumination)
• MAGNETAC (Magnetic Activation)
• D.A.R.C. (Dark Adaptive Reticles & Coatings)
• Designed, developed, tested and fully assembled in the USA

Specifications:

• Color Coyote Tan
• Category Red Dot Sights
• Adjustment Increments 1.5 MOA
• Magnification 1x
• Objective Lens Diameter (mm) 24mm
• Battery (1) CR2032
• Reticle 2 MOA Red Dot / 32 MOA Circle
• Overall Length 2.4 in
• Overall Width 0.9 in
• Height 1.1 in
• Weight 1.5 oz
• Waterproofing Submersible to 35 meters
• Illumination settings 12 Daylight / 3 NV
• Total elevation travel 40 MOA
• Total windage travel 80 MOA